Can’t find a qualified repair technician? Then let us repair and service your gear. We have a state of the art facility with factory technicians that will return your gear to factory specifications.
— Your complete satisfaction is our goal. If any service from us does not meet your expectations, we will readjust or service the item again at no charge within 45 days from the date of service.
— We are happy to offer you an estimate of repair costs. We will not perform any service which exceeds the estimate by $25 without your prior approval.
Pick up / Drop off service
— Don’t have time to drop off your equipment? We will pick it up from you and drop it off when it is done.
— Not responsible for items left over 60 days.
2009 Pricing & Description of Service
|Buoyancy Compensator (BCD)
||$25 + Parts
Completely disassemble, clean and carefully inspect all parts for damage, corrosion and wear.
Replace any parts as appropriate.
Reassemble and test.
|Cylinder, visual inspection
||$12 + Fill
Inspect to standards of Professional Scuba Inspectors, Inc. (PSI)
If appropriate, use an eddy current device to further evaluate the threads.
Clean the neck/valve threads, lubricate and install new neck/valve O-ring.
Install valve on cylinder and test for leaks.
Affix evidence of inspection decal.
|Cylinder, hydrostatic test
Test the cylinder at a DOT-authorized hydrostatic test facility.
|Cylinder, interior tumble
Tumble cylinder with abrasive appropriate for cylinder composition.
Blow out cylinder with high pressure air to remove all dust.
|Cylinder and Valve Oxygen Service
||$60 + Parts
Wash cylinder interior with environmentally safe detergents to remove hydrocarbon contamination.
Rinse cylinder interior and thoroughly dry.
Completely disassemble valve, clean, and carefully inspect all parts for damage/corrosion/wear.
Replace any parts as appropriate, and always replace the burst disk and all O-rings using oxygen-compatible products.
||$65 + Parts
Maintain 1st and 2nd stage, backup 2nd stage, SPG and BCD hose end.
Completely disassemble, clean, and carefully inspect all parts for damage/corrosion/wear.
Replace any parts as appropriate, and always replace all soft parts and seats.
Check the submersible pressure gauge for accuracy across a range of pressures.
Inspect the high-pressure swivel, and replace O-rings.
Inspect all hoses, clean and lubricate the BCD hose end.
Note — Call for pricing for per stage or Air source 2 units.